SimTech WeldTech Bedienungsanleitung PDF herunterladen (Seite 17)

WeldTech - 75 Instruction Manual

SIMTECH

Phone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.070714

• If need be, loosen the turning handle for xing (see point 4.1 No. 5) and open the slide by

means of the handle.

• Set the diameter to be processed at the limit stop for insertion depth.

• Swing in the heating element which has been brought to temperature (control lamp is

blinking).

• Close the machine slowly and with low force onto the limit stop of socket and spigot (pipe

and ﬁtting must touch the socket / spigot simultaneously).

Insertion depth at heating spigot Picture 5

• Press the stop watch. After expiration of the heating time, the change over time starts: open the

machine quickly, swing out the heating element and close immediately the machine slowly

and with low force up to the limit stop (change over time).

• Now, the cooling time starts. After expiration of the cooling time, the welding process is

ﬁnished, the pieces can be unclamped and removed.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Keine Kommentare

SimTech WeldTech Bedienungsanleitung Seite 17