SimTech WeldTech Bedienungsanleitung PDF herunterladen (Seite 16)

WeldTech - 75 Instruction Manual

SIMTECH

Phone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.070714

• Open the machine, press the xing cnob (see point 4.1 No. 7) and keep it pressed, close the

machine until it reaches the stop (zero position). If need be, secure the position by means of the

turning handle for ﬁxing (see point 4.1 No.5).

• Insert the chamfered pipe so that the end face is adjacent to the tting. Pipe Fitting

Picture 3: Positioning the pipes towards the ﬁtting

• Clamp the pipe tightly.

• If need be, compensate the horizontal mismatch:

The position of the heating element can be adjusted at the screw (see point 4.2 No.16).

The heating element is not ﬁxed after swinging in and remains movable to the top. For this

reason, a vertical mismatch compensation is not necessary.

In addition, the horizontal mismatch can be compensated by loosening the counter nut

and adjusting at the adjusting nut.

Picture 4

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Keine Kommentare

SimTech WeldTech Bedienungsanleitung Seite 16