SimTech WeldTech Bedienungsanleitung PDF herunterladen (Seite 11)

WeldTech - 75 Instruction Manual

SIMTECH

Phone: 877-777-2467 • Fax: 215-547-9129

www.SimtechUSA.com

1.070714

3 Functional Description

Basically, the international and national standard speciﬁcations have to be followed.

First of all, the two workpieces to be welded are put into the clamping device, the ﬁtting is clamped at

the stop of the clamping device.

Then the zero offset is effected and the pipe can be clamped in such a way that both workpieces can

be heated up to welding temperature at the same time (heat-up time) by means of a socket- or spigot-

shaped heating element.

After swinging out the heating element (change-over time), the workpieces are joined (cooling time).

The pipe end, heating element and ﬁtting socket are to match each other in size in such a way that a

joining pressure will build up during joining.

After expiration of the cooling time, the welded joint can be unclamped, the welding process is ﬁnished.

Picture 1 shows the principle of the welding method

Picture 1: Principle of heating element socket welding

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Keine Kommentare

SimTech WeldTech Bedienungsanleitung Seite 11